Anycubic PLA Silk Dual Filament 1kg - Black/Purple

Dual-colour gradient silk finish | Smooth, high-lustre surface | Compatible with 1.75 mm FDM printers | Printable at 50–250 mm/s | Intelligent identification supported

The Anycubic PLA Silk Dual Filament in Black/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape. The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle — ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210–240 °C and 50–250 mm/s ranges, you can dial the surface gloss up or down to suit the look you're after. The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.

Features

• Dual-colour gradient blends black and purple for a rich, layered visual effect
• Silk-like lustre that shifts with viewing angle, giving prints a premium aesthetic
• Adjustable surface gloss — tune temperature and speed to control sheen level
• Compatible with all 1.75 mm FDM printers; no special hardware required
• Supports intelligent identification on compatible Anycubic printers for seamless setup
• Recommended for decorative parts, fan art, figurines, and display models
• Certified to RoHS, REACH, and SDS standards

Specifications

• Colour: Black Purple (#212721,#7249C7)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young's Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Silk Dual Filament 1kg - Black/Purple x1